Mon-Fri: 7AM-8PM, Sat: 8AM-6PM, Sun: 9AM-5PM Licensed & Insured [email protected] Serving Keene, NH

Sommer Opener Circuit Board Replacement in Keene, NH

Failed logic boards and receivers replaced, often after a power surge. Typical cost $175-$400.

From the first phone call to the final safety test, Sommer opener circuit board replacement in Keene, NH follows a simple process: diagnose, quote, repair, test. Failed logic boards and receivers replaced, often after a power surge. Whether your Sommer opener is a few years old or a few decades, we can diagnose it and tell you honestly whether it is worth repairing. Sommer openers, made in Germany, put the motor on a carriage that travels along the rail instead of hanging from the ceiling, so servicing them is a little different from a conventional opener.

Signs you need Sommer opener circuit board replacement

  • The opener is completely dead even though it has power
  • It worked until a storm or power surge
  • Random operation or no response to any control
  • Diagnostic lights showing a board fault

Why this happens

  • Power surges and lightning
  • Heat and moisture damage
  • Age

What you can check yourself

  • Reset the breaker and try a different outlet.
  • Unplug the opener for a minute, then plug it back in.

Still stuck? Our free symptom checker and troubleshooting wizard walk you through it step by step.

How we handle Sommer opener circuit board replacement

  1. Confirm power and rule out sensors and controls
  2. Replace the logic board or receiver
  3. Reprogram remotes
  4. Set the limits and force
  5. Recommend surge protection

On older openers, a new opener can cost about the same as a board and adds current safety and security features.

Sommer Opener Circuit Board Replacement cost in Keene, NH

$175-$400Typical range, parts & labor
about 1 hourTypical time on site

What moves the price:

  • Drive type: chain, belt, screw or wall-mount
  • Whether the fix is a part or a whole new opener
  • Remotes, keypads and smart accessories
  • Ceiling height and rail extensions

These are typical U.S. ranges, not a quote. You get an exact price for your door before any work starts. For a quick estimate, try the repair cost calculator.

Other Sommer services

Local Sommer opener circuit board replacement for Keene, NH

Cold weather thickens the grease in an opener's gears and rail, so a door that strains or reverses only in winter often needs force adjustment and cold-rated lubrication, not a new opener.

Technicians serve all of Keene (ZIP codes 03431 and 03435), plus Swanzey (4.4 mi), Chesterfield (10.2 mi), Fitzwilliam (12.6 mi) and Brattleboro, VT (15.3 mi). Call (833) 435-8883 to book a visit in Keene.

Sommer Opener Circuit Board Replacement: frequently asked questions

How much does Sommer opener circuit board replacement cost in Keene, NH?

Sommer Opener Circuit Board Replacement typically costs $175-$400 including parts and labor, and usually takes about 1 hour. The exact price depends on your door and the parts it needs, and you get it before any work starts. Call (833) 435-8883 for a quote.

Can you do Sommer opener circuit board replacement the same day?

Often, yes. When a technician is available we can usually come the same day, and common parts are carried on the truck. Doors that won't close or have a broken spring are treated as priority calls, and emergency service is available.

Is Sommer opener circuit board replacement covered by a warranty?

Our work comes with a 90-day labor warranty on repairs. New parts and doors also carry the manufacturer's warranty, and Sommer warranty terms vary by product and age. Ask for the warranty details in writing with your quote.

Are your technicians licensed and insured?

Our technicians are insured, and where New Hampshire or Keene requires a contractor license for garage door work, the job is done under that license. You're welcome to ask for proof when you book.

Should I repair or replace my opener?

A good rule of thumb: if the repair costs more than about 50% of a replacement, or the opener is near the end of its life, replace it. Most openers last 10 to 15 years. If yours is older than that, lacks photo eyes or rolling-code security, or needs a logic board or motor, a new opener is often better value. Springs are the exception: a broken spring is always replaced, never repaired. Our free repair vs. replace calculator can help you compare.

More services

Popular Garage Door Services in Keene, NH

Skylink Smart Garage Door Opener Setup

Skylink makes openers and a wide range of universal replacement remotes and keypads.

Typical $100-$900

LiftMaster Smart Garage Door Opener Setup

LiftMaster is the professional-installer brand of The Chamberlain Group. The color of the learn button on the motor unit shows which remotes are compatible (yellow on Security+ 2.0 models; purple, red, orange or green on older ones), and most current models work with the myQ app.

Typical $100-$900

Craftsman Garage Door Sensor Repair

Older Craftsman openers with model numbers starting with 139 were built by Chamberlain, so their remotes and parts often match Chamberlain and LiftMaster models from the same era.

Typical $100-$250

Windsor Door Garage Door Cable Repair

Frayed, snapped or slipped lift cables replaced and the door re-leveled.

Typical $150-$350

Wood Garage Door Repair

Rotted, warped or split wood sections repaired, sealed and rebalanced.

Typical $200-$700

Wayne Dalton Torsion Spring Replacement

Wayne Dalton is part of the Overhead Door Corporation. Many Wayne Dalton doors use the TorqueMaster spring system, with the springs sealed inside the torsion tube, so spring work needs TorqueMaster parts and a different procedure.

Typical $200-$450

Richards-Wilcox Extension Spring Replacement

Side-mounted extension springs replaced in matched pairs, with safety cables installed.

Typical $150-$350

Genie Smart Garage Door Opener Setup

Genie is the residential opener brand of the Overhead Door Corporation. Genie openers use Intellicode rolling-code remotes, Genie is one of the few brands still offering screw-drive openers, and newer models connect to the Aladdin Connect app.

Typical $100-$900

Garage Door Safety Inspection

A full safety check of springs, cables, sensors and auto-reverse.

Typical $75-$150

Clopay Garage Door Repair

Clopay is one of the largest residential garage door makers in North America, with lines such as Classic, Modern Steel, Coachman and Canyon Ridge. The model is usually printed on a label on the door's end stile, which helps us match replacement panels.

Typical $150-$450

Midland Garage Door Garage Door Panel Replacement

Dented, cracked or rusted sections replaced or repaired to match your door.

Typical $300-$900

Haas Door Garage Door Repair

Haas Door, based in Wauseon, Ohio, makes residential and commercial sectional and rolling doors.

Typical $150-$450

Garage door stuck, noisy or broken?

Talk to a garage door technician in Keene, NH now. Tell us what the door is doing and we'll give you a price and an arrival window.

Call NowFree Quote